各位大大幫忙一下 電腦一直出現這個訊號
 

A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you`ve seen this stop error screen,restart your computer. IF this screen appears again, follow these steps.

Check to nake sure any new hardware or software is properly installed. IF this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe made to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.

***STOP: 0x0000000A(0x00000004 , 0x00000002 , 0x00000000 , 0x804F2A9E)

Beginning dump of physical memory.
Physical memory dump complete.
Contact your system administrator or technical support group for further assistance.


----------------------------------------------------------------------
My PC:
CPU：AMD Athlon XP-1700
MB：ABIT KV7
RAM：創見 DDR-400 256 MB
HD：Mator 80G DMA 133
VGA：NVIDIA GeForcr2 MX400/64MB

我也是耶
該不會是中毒了吧

剛剛查了一下這裡,大概是說安裝了有問題的驅動程式,系統服務或韌體...

Resolving the Problem
The following suggestions are specific to Stop 0xA errors. For additional troubleshooting suggestions that apply to all Stop errors, see "Stop Message Checklist" later in this appendix.

A Stop 0xA message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, and CD mastering tools.
A Stop 0xA message might also be due to failing or defective hardware. If a Stop message points to a category of devices (video or disk adapters, for example), try removing or replacing the hardware to determine if it is causing the problem.
If you encounter a Stop 0xA message while upgrading to Windows XP Professional, the problem might be due to an incompatible driver, system service, virus scanner, or backup. To avoid problems while upgrading, simplify your hardware configuration and remove all third-party device drivers and system services (including virus scanners) prior to running setup. After you have successfully installed Windows XP Professional, contact the hardware manufacturer to obtain compatible updates. For more information about simplifying your system for troubleshooting purposes, see " Troubleshooting Concepts and Strategies" and "Troubleshooting Startup" in this book.
For more information about Stop 0xA messages, see the Microsoft Knowledge Base link on the Web Resources page at http://www.microsoft.com/windows/reskits/webresources. Search using keywords winnt, 0x0000000A, and 0xA.