![]() |
PCDVD數位科技討論區
(https://www.pcdvd.com.tw/index.php)
- DVD 討論區
(https://www.pcdvd.com.tw/forumdisplay.php?f=5)
- - BenQ 16x , D9 機器 Cebit 亮相
(https://www.pcdvd.com.tw/showthread.php?t=306315)
|
|---|
BenQ 16x , D9 機器 Cebit 亮相
剛看到的..
http://www.cdrinfo.com/Sections/New...?RelatedID=4967 BenQ to demonstrate 16x and DVD9 DVD burner in CeBIT 2004 Wednesday, 25 February 2004 BenQ will demonstrate the upcoming DW1600A 16x DVD burner and the DW830A dual layer DVD recorder in CeBIT 2004. The DW830A will be available in the market in April, 2004. The second generation of this drive is expected in the third quarter of 2004 and will probably support both DVD formats (DVD+R/-R). The DVD+R9 drive will support the Walking-OPC II technology, offering real-time monitoring of the CD/DVD burning process for guaranteed recording quality. The specifications of the drive also include an 8MB buffer, and 8x recording for (4.7GB), 4x for DVD+RW, 12x DVD-ROM reading and 2.4x DVD+R9 burning. Further plans of the company include the 16x DVD+R burner, the DW1600A, also offering dual layer burning. Available in third quarter of 2004, the drive uses the appropriate technology to maintain 16x DVD+R recording, which is the physical top level for DVD recording, with a rotational speed fixed at 10800 rpm ~ 180 Hz ~ 200 km/h. Additional hardware requirements would include correct bit clock timing, laser pulse timing, high resolution writing strategy, high performance servo requirements Robustness to media spread/drive spread and temperatures. The specifications of the DW1600A inlude the impressive 16x4x16/2,4 (DVD+R9) and 40x24x40 CD-RW. |
dw830a四月份就可以在市場看到,也許會有可支援雙規軔體出現,可燒DVD+R D9!
dw1600一樣也是可燒DVD+R D9不過好像都是2.4X,一般DVD+R D5才是16X,看來pioneer出的a09我看也差不多,看來燒D9的速度還不是很吸引我,如果要燒滿8G以上,那時間上....:o 等片子的品質和價格和現在空片差不多價格才考慮入手:o |
流口水中
|
期待中:like:
|
D9用 2.4X倍燒,那一片不就要燒50分鍾,我咧~~~
dw830a要等到四月,dw1600要到第三季才出,那我看要等到 2005年才會有可接受的D9燒錄速度 :jolin: ps 有人知道pioneer的a09啥時會出嗎? |
引用:
上次看到資料說.. 2004/Q4 或是 2005/Q1 目前詳細規格不清楚- 不過聽說實際燒錄時間會更久, 因為一定要close才能被讀到.. 這是 - 的限制.. 上次從美國看到的資料說, Pinoneer 正努力嘗試可能的解決方案. 從目前各方看到的資料, +R9 從規格, 或實際量產 時間 都比 -R9 快滿多的. 不只 BenQ, .. 點燈, NEC 都說 最晚2004/Q4 會有 +R9 機器上市.. -R9 應該還是只有 Pinoneer 一個人在玩 |
D9 的成本有可能短期降低嗎
請問有誰能比較一下單層與雙層的製造程序及各項程序的成本?
看來D9的燒錄機快要面市了, 可是片子呢? |
回覆: D9 的成本有可能短期降低嗎
引用:
片子價格也是大家關注的一個重點 |
看來2005年才是進場的時機吧
|
回覆: 回覆: D9 的成本有可能短期降低嗎
引用:
說滴不錯 |
| 所有的時間均為GMT +8。 現在的時間是10:21 PM. |
vBulletin Version 3.0.1
powered_by_vbulletin 2025。