我的承啟ZNF3-150+AIDA32=Stop: 0X0000009C
 

唉,玩這麼多年電腦,功力一點都沒長進,每一次換一個平台,總是問題一大堆,debug半天,問題還是解決不了,到頭來買了一堆東西,浪費一堆錢:jolin: ,現在又有新問題想請大家幫忙,麻煩大家幫幫我,感謝
話說裝了承啟ZNF3-150+Athlon 64 3200+再加上Mushkin PC3500 Level II 512MB*2(BH-5)+Windows XP pro,灌完後照例裝上一堆driver,就在灌了AIDA32之後,一執行,死當,黑黑一片沒螢幕,顯示卡是ATI 9800XT,因為每一次開啟AIDA32到掃描PCI裝置時就會當掉,因此懷疑是PCI卡衝到,於是我就把卡都拔掉,再run AIDA32,結果還是當,關掉第3組IDE(nForce3 150總共可裝6個ATAPI週邊),還是當,沒超頻也當,重灌OS也當,最後只好把ATI顯示卡換成nVidia顯示卡,結果還是當,但是這一次有一點不同,不再黑漆漆的,有看到藍天白雲,還有底下的字"Stop: 0X0000009C"(不知為何,ATI顯示卡當掉時螢幕黑漆漆,都看不到藍天白雲的字),有了代號,就到微軟去找答案,結果找到以下說明
http://support.microsoft.com/defaul...kb;en-us;329284
CAUSE
This behavior occurs because your computer processor detected an unrecoverable hardware error and reported it to Windows XP. To do so, it used the Machine Check Exception (MCE) feature of Pentium processors or the Machine Check Architecture (MCA) feature of some Pentium Pro processors. The error may be a result of any of the following:
1: System bus errors.
2: Memory errors that may include parity or Error Correction Code (ECC) problems.
3: Cache errors in the processor or hardware.
4: Translation Lookaside Buffers (TLB) errors in the processor.
5: Other CPU-vendor specific detected hardware problems.
6: Vendor-specific detected hardware problems.
我有試過run R.S.T,RAM沒有錯誤,想跑Memtest86卻不給跑,不知為何??
想請問各位能否幫我解釋一下這種情形,到底該怎麼解決,感謝了:cry:
PS:這個系統能過Prime95 23.7.1版24小時,但是卻run不了AIDA32:shock:

您手上那塊 青雲K8主機板還在嗎? 先把它裝起來試試看,把 RAM 跟 CPU 換到上面去試試:)

BorgMu同學,煩收PM,thanks

記憶體換條試試看......:)
(不要用那兩條512......)

系統只剩下一顆hd 跟顯示卡就好........:)

下載aida32pe_390來測看看,結果完全正常!!!

配備如下:
http://www.tacocity.com.tw/crescent/my

我換上A-DATA的RAM也是一樣,最奇怪的是,我找到的微軟文件中,有一段話特別奇怪
"A machine check exception occurs when Windows XP and your hardware platform cannot recover from some type of hardware error so that the system can continue to run successfully and reliably. ",既然有hardware error,系統還能執行成功(successfully)並且可以信賴(reliably),真奇怪??:confused:

同感:jolin: