運氣還是內幕??
 

今天補充了十片心目中算是可用的RIDATA 4X +R空片(藍綠色版面)
沒想到新買的連燒兩片都死(導入就掛了)...
想說會不會是機器的問題,於是拿了之前買的RIDATA 4X +R...連續兩片OK
於是又放了一片新買的...又掛...
於是看了一下銀色圈上的數碼...舊的是D1109A51706R...新的是D0403A20404R
居然新買的上面三片都是D0403A20404R且都剛好導入就掛片...
趕緊又看了一下新買剩下的七片...還好都是D1109A51706R...於是連燒了6片都OK!!


結論:只有新買的參雜其中的那三片D0403A20404R有問題!!而D1109A51706R的部分沒有問題...這是運氣,巧合還是內幕??

p.s.我是用SONY 500A 2.0G

謝謝提供消息
回家檢查一下庫存的是新的還是舊的號碼

same with Melody 4x +r; my first two pack (10pcs/pack) were doing fine but the 3rd one is horrible, 5 out of 10 could not be finalized after recording, the other 5 have 3 showing 'no disc' on the dvd vedio recoder, i dare not do anything to the rest two even they are readable at this moment....may not be able to be finalized properly. I am returning to the shop...now awaiting the comments from the service center.

it seems quality of +r varies a lot; +rw is very stable to me no matter Melody, Ritek, or Memorex which are used now by me (perhaps all from Ritek?)

Now I only use +rw for recording as the price difference between +r & +rw is not much now; Ritec +rw sells 65/pc at normal shop, I am sure there should be other channels much cheaper

我覺得有可能是stamp的關係
我也有燒過traxdata的4+R
也是lead-in超久 然後就掛了
拿起燒錄片來看只燒了最內兩小圈
而且一整圈中有一小部份燒錄痕跡很淡
兩個圈圈中變淡的位置相同
所以我覺得是製作上的不良品

要不要統計一下?
 

之前看到這個討論沒有很在意
因為 510A 1.0d + Ridata +R 4x 燒的很順
想不到....昨天要燒一片Friends
連續燒壞5片....天那....一片要45ㄟ...
也是在剛燒的時候就壞了....環碼也是D04xxxxx

後來我燒RIDATA+RW or -R 都沒問題啊....()
----------------------------------
我買了40片ㄟ....
後來跑去全換-R

話說回來...降的真快 Ridata -R=35-36 +R=40 ....
------------------------------------------------
有沒有人跟我有同樣問題啊?