Win2000 是否 support Intel 2.4C HT ?
 

INTEL 2.4C HT CPU 如用在 WIN2000 上, 可否有 HT 功能? 還是必須要用 WINXP ?

只有xp才有支援

我們公司前天裝了二部P4 2.4CG, 用的是WIN2000, 但是裝好之後按下CTRL+SHIFT+ESC去查看效能, 發現有二顆CPU的使用率記錄耶!!

這意味著什麼? WIN2000被主機板騙了嗎? 還是 WIN2000被CPU騙了?

好像裝了SP(不知道到多少了.好像是SP4)之後.
就可以使用HT的CPU了.因為在2000出來的時候.並沒有HT.
所以是以實體雙CPU.讓2000PRO來跑的.經過更新之後.
HT也可以辨識開啟了.所以也可以使用HT的P4了.

Operating System Support
Microsoft* Windows* Operating System Based PCs

The following desktop operating systems include optimizations for HT Technology and are currently eligible to carry the new Intel® Pentium® 4 Processor with HT Technology logo:

**Microsoft* Windows* XP Professional Edition
**Microsoft* Windows* XP Home Edition

The following operating systems are not recommended for use with Hyper-Threading Technology. If you are using one of the following operating systems, it is advised that you should disable Hyper-Threading Technology in the system BIOS Setup program

**Microsoft Windows 2000 (all versions)
**Microsoft Windows NT* 4.0
**Microsoft Windows Me
**Microsoft Windows 98
**Microsoft Windows 98 SE

If it is to say.....HT is only used in Windows XP version no matter whether the version is pro nor home.

However, Windows server could be used in multiple cpu system. If system recognize HT as two cpus, will this system be unstable?

我現在就是裝2k使用2.4cg ht
可以正常辨識有2顆cpu
實際使用上也比較順
跟我另一台2.4bg做同樣的事真是有比較順

裝SP4就可以了
但不建議
因為風評不是很好
就我知道的3D Studio MAX這套軟體
在sp4下跑檔案會損毀(官方網站公怖)

2000 更新到 sp4 是可以支援ht 但是效能沒有xp底下支援ht 效能來的好!~~