NF-S 7 2.0 v not able to run 400 DDR
 

各位大大，

我有 2100+ (166x15)

i just brought OCZ 3500el 512 x2
tried running at 200x11 or 200 x10 both failed
my pc failed to complete Super P1 4MB and Prime 95 test

my cpu at 1.7, also tried 1.725 and 1.75 doesn't help
chipset at 1.7, ram at 2.8

any suggestion?

thanks




SOFT MENU

soft menu operating speed>>>>> user
external clock>>>>>>>>>>>>>>200
multiplier factor>>>>>>>>>>>>>11
AGP frequency>>>>>>>>>>>>>66
CPU FSB / DRAM ratio >>>>>>>>auto or 6/6
CPU interface>>>>>>>>>>>>>>enabled
VOLTAGES
1.75
2.8
1.7
1.6


ADVANCED CHIPSET
9
3
3
2

SYSTEM bios cacheable >>>>>>>>>>disabled
SYSTEM ram cacheable >>>>>>>>>>disabled
AGP apature>>>>>>>>>>>>>>>>>256
FSB spread spectrum >>>>>>>>>>>>>disabled
AGP spread spectum>>>>>>>>>>>>>dissabled
CPU thermal throttling >>>>>>>>>>>disabled
enhance PCI performance >>>>>>>>>>>enabled
CPU disconnect function>>>>>>>>>>>>>dissabled or enabled
AGP data transfer rate >>>>>>>>>>>>8x
Fast wrights >>>>>>>>>>>>>>>>>>disabled

你的ram是ddr433 ??
那麼請把你的CPU設成216x8.5先試試 看穩不穩
高外頻需要比較高的電壓


ram的參數先設成9-3-3-2.5比較好

試200x8
200x9 cpu at 1.7v it works ar
200x10 cpu needs to up voltage to 1.75........

i was running 166x14 at cpu 1.7v....

ram is by spd