Crucial M4 New Firmware
 

Version : 040H

Release Date: 12/04/2012
Firmware for the Crucial m4 2.5” SSD is being updated from version 010G to 040H.
The m4 is updatable to this new firmware starting from any previous version in a single step.
Do NOT use any other m4 firmware update for your 2.5” SSD such as the 04MH firmware for the mSATA form factor.
Version 040H includes the following changes:
Improved robustness in the event of an unexpected power loss. Significantly reduces the incidence of long reboot times after an unexpected power loss.
Corrected minor status reporting error during SMART Drive Self Test execution (does not affect SMART attribute data).
Streamlined firmware update command for smoother operation in Windows 8.
Improved wear leveling algorithms to improve data throughput when foreground wear leveling is required.

Updater Application
http://edge.crucial.com/firmware/m4...mwareUpdate.zip

Manual Boot File for Windows and MacR
http://edge.crucial.com/firmware/m4..._040H-04-00.zip

感謝,看到你也用V2000的機殼,應該算是一個好機殼.

很好用....缺點就是...用過v2000找不到機殼可以換...
v2000 ,
有雙power 空間,
長卡 (想裝多長的卡都可以....7970裝上去 後面還有20多公分左右,如果前面位置的 5.25給她空出來 整個有可以到 30cm以上的空間 空在那....),
12顆 hdd , 7個 5.25" 兩者完全不會互相占用...
而且當年....萬元內.....可惜停產了....
聯力~~~我在等V系列的後續作~~~....不知道要等到何年何月...

:D 似乎有把 010G 版Firmware 的問題修正回來了，讀取速度也回到和 000F 差不多的樣子....

有下有回！~
謝謝網兄分享提醒XD

P8Z77-V的板子不知道可不可以直接在Win下面刷...

請問刷韌體是不是原本裡面的資料會全不見
以前買了顆金士頓v200的是這樣
買到現在都還沒刷過

已經成功在Win 7內刷成功

感謝提供資訊

M4沒用過 不過大多數的網友都說不會

我自己的M3P升級新軔體資料也都還在

昨天升級完成(由000F升級)，資料一切安好無變化 :)