快來更新你canon像機韌體吧!!!
 

嗯........
責任自負....:D


連結

這是4/19日發布的韌體更新.沒經驗的用家還是拿著韌體去彩虹弄吧.

PowerShot S300 DIGITAL ELPH Ver. 1.0.0.2
PowerShot S110 DIGITAL ELPH Ver. 1.0.0.2
DIGITAL IXUS 300 Ver. 1.0.0.2
DIGITAL IXUS v Ver. 1.0.0.2
PowerShot G2 Ver. 1.1.0.0
PowerShot S40 Ver. 1.1.0.0
PowerShot S30 Ver. 1.1.0.0
PowerShot A20 Ver. 1.0.0.2
PowerShot A10

呵呵 3Q 3Q 下載完 已更新完畢 ^^

請問一下，更新韌體有什麼好處呀?

謝謝shung提供消息！

網頁上有寫改進的地方，主要是他自家印相機的支援，
是英文，不會很難啦！

PowerShot G2 Firmware Update (Ver. 1.1.0.0)

Firmware update Ver. 1.1.0.0 provides the following user benefit:

1.Supports Direct Print Function for CP-100 Photo Printer
2.Supports Direct Print Function for Direct Print Compatible BJ printers
3.Supports Exif 2.2
4.Supports ON/OFF selection of the power-saving mode while connected to a computer


Firmware update Ver. 1.1.0.0 provides the following modification:

1.Modifies the firmware so that the exposure compensation settings apply in the movie mode
2.Corrects the phenomenon that tended to make the image overexposed or underexposed after taking more than two photos in the high speed continuous shooting mode
3.Corrected the phenomenon that caused occasional CF write errors when taking photos in the high speed continuous shooting mode


This firmware also includes the following content that is already supported by the previous firmware update (Ver. 1.0.1.0):

1.Improvement of the camera's internal charging function when the BP-511/BP-512 battery pack is over-discharged

呵呵 你去下載時 它就有說明了呀
下面是 S40更新韌體後的改變
PowerShot S40 Firmware Update (Ver. 1.1.0.0)
Firmware update Ver. 1.1.0.0 provides the following user benefit:
Supports Direct Print Function for CP-100 Photo Printer
Supports Exif 2.2
Supports ON/OFF selection of the power-saving mode while connected to a computer
Firmware update Ver. 1.1.0.0 provides the following modification:
Modifies the firmware so that the exposure compensation settings apply in the movie mode
Corrects the phenomenon that caused occasional CF write errors when taking photos in the high speed continuous shooting mode

請問水貨更新會不會出問題啊?!
更新過程似乎要用到讀卡機~~~沒有讀卡機怎麼辦?!
我ㄉ是s30ㄉ~~~有沒有人更新成功啊?!
我怕更新時會當機說~~~~~

更新的時候不見得需要讀卡機,讀讀他的Readme檔,說的很清楚

很報歉ㄝ~~~我怎麼看readme都沒講到如何不用讀卡機可以把檔案
copy到cf卡裡ㄝ~~~可能是我英文不好ㄅ~~~你可否告訴我如何用ㄋ?!
謝謝喔^^

如果你沒有讀卡機裝置 則更新CANON韌體方式如下(以S40作範例)

1.插入 CF 卡片在 PowerShot S40 之內，而且用USB電纜連結它到個人電腦。
2.點擊”S40_ FirmUpdate1100”資料夾中之"UPLOADFIRMWARE.EXE執行檔，而且跟隨指令以便”DC97”文件夾自動上傳至 CF 卡片中
3.上傳完畢後，將相機和電腦分離並開啟像機至撥放模式
4.按MENU選單並點擊Firm Update
5.按" SET"並點選" OK"
6.更新時間約90秒，期間請勿關閉電源或操作其他按鍵
7.更新完畢後，像機會自動關機
8.若更新失敗切勿關閉電源，請重複步驟(4)再操作一次


PS 更新前 CF卡 請先FORMAT 並請致放至少2MB以上之CF卡
操作中切忌關閉電源

謝謝~~~我更新好ㄌ~~~沒有遇到任何問題~~~很順^^
但是~~~更新之後我ㄉs30有什麼差別ㄇ?!
有差ㄇ?!告訴我有啥差別好ㄇ?!