PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)
-   疑難雜症區 (https://www.pcdvd.com.tw/forumdisplay.php?f=34)
-   -   winxp安裝問題 (https://www.pcdvd.com.tw/showthread.php?t=87836)

DIDO 2002-04-02 12:28 PM

winxp安裝問題
 
灌到裝置設定快完時都會出現這些東東~~我確定光碟是好的~~
麻煩幫幫忙看看是什麼原因~~我升級灌重新灌都試過了~~

A problem has been detdcted and windows has been shut down to prerent
damage to ypu computer

The problem seem to be caused by the fllowing file:partmgr.sys

DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS

chack to make sure any new hardware or software is properly installed
partmar.sys

Beoinning dump of physical memory
physical memory dump complete
contaxt your sysem administrator or technical support group for
further assistance.

DIDO 2002-04-02 10:13 PM

推~~各位幫幫忙~~~~

ghtasin 2002-04-02 10:23 PM

再去檢查硬體看看,因為說是硬體或軟體的問題,除非你是升級才有軟體問題,我想是硬體衝突吧,再去看看,那不然把硬碟格式化,再試一次,有問題再問我.

stardog 2002-04-02 10:37 PM

可以PO出你的配備嗎?
看起來是硬體的問題
有超頻請先降回來,記憶體也請調到最低速(個人覺得記憶體蠻可能有問題的)
建議你在灌之前應該先跑跑看相容性測試(在windows底下灌的時候會出現選項)

seawave 2002-04-03 01:08 AM

換條記憶體看看
cpu不要超頻

DIDO 2002-04-03 09:42 AM

謝謝各位大大的建議~~不過我都試過了~~我把cpu降回來記憶體也調回原
來的時脈...我升級灌...format灌~~都一樣~~都死在同一個地方~
但是我me灌的很好沒問題..搞的我火都大了~~~~
我的配備~ k7 1700+xp
偉格rv4 kt266a
勤茂 256mb pc2100 (號稱可上333)
梭魚3代 20gb 7200轉
來旺牌12x燒錄機一台
來旺牌16x dvd一台
一片螃蟹卡 (雜牌)

stardog 2002-04-03 09:46 AM

那個...可以的話看能不能借條記憶體來測..
& 把其他周邊先拔掉(ex:螃蟹卡)
不然...xp也沒多好啦就用98ㄅㄟ

DIDO 2002-04-03 01:47 PM

記億體換過了`~剛剛灌還是一樣~~在測試相容度時~~它有說有些硬體有
不相容的樣子~~但沒說是那一個~~這樣怎麼辦ㄟ~~我想不透是那個硬體相衝
說???有人有經驗嗎??幫幫忙

ghtasin 2002-04-03 06:49 PM

那就是主機板了,我以前遇過灌到一半就有問題,換了主機板就好了.

waterhoo 2002-04-03 07:08 PM

Re: winxp安裝問題
 
引用:
Originally posted by DIDO
灌到裝置設定快完時都會出現這些東東~~我確定光碟是好的~~
麻煩幫幫忙看看是什麼原因~~我升級灌重新灌都試過了~~

A problem has been detdcted and windows has been shut down to prerent
damage to ypu computer

The problem seem to be caused by the fllowing file:partmgr.sys

DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS

chack to make sure any new hardware or software is properly installed
partmar.sys

Beoinning dump of physical memory
physical memory dump complete
contaxt your sysem administrator or technical support group for
further assistance.


>>>>>>>
會不會是排線出錯了???


所有的時間均為GMT +8。 現在的時間是06:36 PM.

vBulletin Version 3.0.1
powered_by_vbulletin 2026。