PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)

- DVD 討論區 (https://www.pcdvd.com.tw/forumdisplay.php?f=5)

- - 830A to 822A (https://www.pcdvd.com.tw/showthread.php?t=339555)

http://bellsouthpwp.net/d/m/dmagic1/BQ/[email protected]

剛剛看到的，裡面只有patcher沒有韌體
可以互刷，小弟沒改成830A(其實是不敢啦）
所以沒試

試過了，還是不行，@@

解鈴仍需繫鈴人~

ftp://ezdisplays:[email protected]/BenQ/B2B3C7.zip
試這個看看

誰可以Post 想從 830A 刷回800A(or 822A)之完整失敗之顯示畫面訊息...........
因上列之B2B3C7我可能漏修改些個資料.....加上我原BenQ DVD-RW 是DW-822A(非800A -> 822A)....故在-R的燒錄上的確比從800A->822A來得很好...且我也沒刷為830A之 DL 功能之需求...............
So..因此沒實際確認過B2B3C7是否可刷回800A(or 822A)....其只修改By Pass其檢查新舊版號的段落部份....故還有一些其它檢查的程序沒By Paas....
所以那位已->830A的先烈能Post其想再次刷回800A(or 822A)失敗的畫面訊息...好再次修改程式....幫幫想刷回來的人..
ps: B2B3C7 是B3C7版本....這是我隨便抓個版本來修改的.....或許我改好前(希望有人盡速Post 其畫面訊息),已有人先Post可刷回的程式了...

引用:

Originally posted by Hsiu_Wen
誰可以Post 想從 830A 刷回800A(or 822A)之完整失敗之顯示畫面訊息...........

引用:

Originally posted by knightfal (轉載http://club.cdfreaks.com)
Hi,

I flashed my 800a to 822, and then to 830.
The problem is when I burn it suddenl stops burning.
Tried to DVD's now and both times it just stops.
One time at 20% and the other at 70%. I use nero 6.3.1.10
I only locks up nero.
I tried then to revert to 822 B3EC with the patch, but it is not possible.

It gives me this error :

Linear Check Sum = A804 A804
Rotated Check Sum = 02F6 02F6
Check Sum match !!
Start Flashing...
Don't turn off the power!!
===================================
Current F/W Version -> New F/W Version
B4A8 -> B4A8
===================================

======== FAIL ========

And when trying to flash back to 800a B2J7 I get this :

Linear Check Sum = 8369 8369
Rotated Check Sum = 3432 3432
Check Sum match !!
Start Flashing...
Don't turn off the power!!

======== FAIL ========

Linear Check Sum = 8A7B 8369
Rotated Check Sum = BD48 3432
Check Sum not match !!

Can someone please help. I want to go back to the B3EC

Thx

以上轉載http://club.cdfreaks.com/showthread.php?t=96710的knightfal 網友的Post文....
不知有沒有幫助!???

回覆: 830A to 822A

引用:

Originally posted by superkernel
http://bellsouthpwp.net/d/m/dmagic1/BQ/[email protected]

剛剛看到的，裡面只有patcher沒有韌體
可以互刷，小弟沒改成830A(其實是不敢啦）
所以沒試

樓主:

有人在找您啦!!

引用:

Originally posted by DMagic1 from cdfreaks.com
superkernel can you private message me?

說因為您的連結, 把他的流量用光了....

引用:

Originally posted by DMagic1 from cdfreaks.com
[B]Yea, went thru the 33mb limit per day pretty fast.
You may want to hold off on it until this reverse issue is sorted. I think some guys over at PCDVD may have a solution. My links were posted over there by someone too. That probably was too much for my little bandwidth limit at my host.

Any translators.......

引用:

Originally posted by Hsiu_Wen
誰可以Post 想從 830A 刷回800A(or 822A)之完整失敗之顯示畫面訊息...........
因上列之B2B3C7我可能漏修改些個資料.....加上我原BenQ DVD-RW 是DW-822A(非800A -> 822A)....故在-R的燒錄上的確比從800A->822A來得很好...且我也沒刷為830A之 DL 功能之需求...............
So..因此沒實際確認過B2B3C7是否可刷回800A(or 822A)....其只修改By Pass其檢查新舊版號的段落部份....故還有一些其它檢查的程序沒By Paas....
所以那位已->830A的先烈能Post其想再次刷回800A(or 822A)失敗的畫面訊息...好再次修改程式....幫幫想刷回來的人..
ps: B2B3C7 是B3C7版本....這是我隨便抓個版本來修改的.....或許我改好前(希望有人盡速Post 其畫面訊息),已有人先Post可刷回的程式了...

建議去抓jacky20313的罪魁禍首版韌體來研究,,然後在來比對,,為什麼別人外國放的破解版韌體只有修改4個Byte..但是這個破解的修改的還真多,,,,,

引用:

Originally posted by cowbey
建議去抓jacky20313的罪魁禍首版韌體來研究,,然後在來比對,,為什麼別人外國放的破解版韌體只有修改4個Byte..但是這個破解的修改的還真多,,,,,

已經下架了...:shy: :shy: :shy:

在還沒找到還原的方法之前...;) ;) ;)