請教要怎麼安裝 SB600 AHCI 驅動?
 

我的版子是MSI K9A2 CF，之前都是用IDE模式，
最近換SSD，到BIOS切換成AHCI再重灌Win7 x64，
但預先載入13.12版的AHCI驅動也抓不倒，灌好後直接把內建的AHCI強制更新，
結果就是跑到WIN四色旗一兩秒就跳重開了，趕時間沒有再測試就重灌... :jolin:

有前輩知道怎麼安裝嗎？ :confused:

http://tw.msi.com/faq/mb-886.html
我在IDE模式下安裝Windows 7。如果將SATA模式改成AHCI，我要如何正常進入Windows 7。
Answer

請以 IDE模式正常進入Windows 7，下載安裝 Microsoft Fixit 50470更新檔 做自動修正，重新開機，將BIOS中的IDE模式改成 AHCI，就可以更換為 AHCI 進入Windows 7。

SB600沒辦法直接安裝AHCI驅動....請先以IDE模式安裝WIN7 X64,

然後進行修改....

不是專轉換的問題，我原本就是用ahci重灌. . .
待會我再用其他硬碟試試看

印像中~AMD沒提供SB600的WIN7驅動

只能用M$提供的

http://www.wikihow.com/Install-AHCI...7-Installations

How to Install AHCI Support for ATI SB600 SATA Controllers on Existing Windows 7 Installations

This article is intended to update the 2009 discussion of adding AHCI support for AMD SB 600 chips based on a simpler method which works for Windows 7 based installations. ASUS does not provide any drivers for Windows 7 and until recently claimed the board did not support Windows 7. Most articles on how to install AHCI concern adding numerous registry entries where adapting the instructions for this board are extremely technical. However, this method works for Windows 7 64bit with the above board and chipset.

SB700 OR更高版本的晶片仍有驅動更新,但是SB600好像很殘念....

感謝兩位前輩指點! :agree:
真的是這樣那也罷，還好沒有浪費時間∼ :ase
測了一下果然是笑能...:laugh:

早期BIOS連AHCI選項都沒有，後來更新才放上來，
那個時候還好像要用特殊方法開NCQ，我都懶得搞，直接用IDE模式...:p

AHCI driver 1.2.1.327 and 1.2.1.321 resulted in blue screen for me (Stop 0x0000007b), 1.2.1.301 did work so checked the inf files and there is only a change in power-management. Changed the value for

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\amd_sata\Parameters\Device\AmdSataPMDisabled"=dword:000000ff

from 0 to 0xff and I could boot again


the instruction to enter 0xff slightly confusing, so to clarify for others just enter ff for the DWORD and have 'hexadecimal' radio button selected.



http://forums.amd.com/forum/message...9&enterthread=y

my mistake, this works on SB700, don't know if it works on SB600 :nonono:

個人經驗是
SB600、SB700的AHCI不要更新驅動，重開會藍底白字

SB710以上就沒問題

驅動要用舊的

新版已經移除SB600

SB700 好像也沒有，忘記了

http://tw.msi.com/product/mb/K9A2_C...er&os=Win7%2064

之前把ASUS那塊790FX+SB600那塊MB裝上WIN7就遇到這問題

最後還是用M$提供的驅動

A社可能也不想再花那個心力了吧(攤手

那塊790FX配SB600...

真的是...一整個...