![]() |
PCDVD數位科技討論區
(https://www.pcdvd.com.tw/index.php)
- 七嘴八舌異言堂
(https://www.pcdvd.com.tw/forumdisplay.php?f=12)
- - F1 2011
(https://www.pcdvd.com.tw/showthread.php?t=919132)
|
---|
老巴好兇殘... :fear: :fear: :fear:
|
引用:
大慨誤認為是老舒,所以就殺紅眼. |
Mercedes-Benz的車那麼差嗎??? "大舒"又休息了
|
Glock 還跑輸 d'Ambrosio.....
|
引用:
今年倍耐力剛接手,耐用性差很多 引用:
一傢伙就把人KO 老經驗的車手出這種包算是耍小白了 |
紐維火星車的威力似乎會因使用者而改變... :flash:
McLaren改車的功力目前來說應該是各車隊最強的吧 開賽前幾天臨時趕工出來的魔改套件竟然能讓車輛性能如此大幅度的提昇 :shock: "天賦"哥Petrov終於無愧於他的"天賦"了 :p 新人Perez居然使用一停策略成功 :eek: 另外 MGP真的悲劇了.... :jolin: |
![]() :laugh: :laugh: :laugh: :laugh: :laugh: |
引用:
FIA要求輪胎廠生產不耐用的輪胎,以免2010年常見的一停策略。 引用:
辭職了,之後ESS是以車評的方式請龔懷主來播報F1。 |
Saubers disqualified over technical infringement
Sauber’s Sergio Perez and Kamui Kobayashi have lost their seventh and eighth places in Sunday’s Australian Grand Prix after both were disqualified for technical infringements on their cars. Following post-race checks, the Melbourne stewards decided that both Sauber C30s were in breach of technical regulations 3.10.1* and 3.10.2**, in relation to their rear wings. It means Ferrari’s Felipe Massa moves up to seventh, Force India’s Adrian Sutil to eighth, Toro Rosso’s Sebastien Buemi to ninth and Force India’s Paul di Resta to tenth, the Scot thus scoring on his F1 debut. *Article 3.10.1 "Any bodywork more than 150mm behind the rear wheel centre line which is between 150mm and 730mm above the reference plane, and between 75mm and 355mm from the car centre line, must lie in an area when viewed from the side of the car that is situated between 150mm and 350mm behind the rear wheel centre line and between 300mm and 400mm above the reference plane. When viewed from the side of the car no longitudinal cross section may have more than one section in this area. "Furthermore, no part of this section in contact with the external air stream may have a local concave radius of curvature smaller than 100mm. "Once this section is defined, 'gurney' type trim tabs may be fitted to the trailing edge. When measured in any longitudinal cross section no dimension of any such trim tab may exceed 20mm." ** Article 3.10.2 "Other than the bodywork defined in Article 3.10.9, any bodywork behind a point lying 50mm forward of the rear wheel centre line which is more than 730mm above the reference plane, and less than 355mm from the car centre line, must lie in an area when viewed from the side of the car that is situated between the rear wheel centre line and a point 350mm behind it." http://www.formula1.com/news/headli...11/3/11874.html --------------------------------------------------------------------------- 簡單來說就是Sauber本站使用之尾翼違反今年的技術規則 所以成績被取消... :jolin: |
Ayrton Senna 去年出的傳記電影
也就是我簽名檔裡面那個 有興趣的請挾去配 http://www.mediafire.com/?29ul3jhhedlvj91 McLaren Ferrari 請多努力... 我實在不想看到 2002 2004 事件重演 :jolin: |
所有的時間均為GMT +8。 現在的時間是02:49 AM. |
vBulletin Version 3.0.1
powered_by_vbulletin 2025。