![]() |
PCDVD數位科技討論區
(https://www.pcdvd.com.tw/index.php)
- 系統組件
(https://www.pcdvd.com.tw/forumdisplay.php?f=19)
- - [心得]有2G以上RAM的可以參考
(https://www.pcdvd.com.tw/showthread.php?t=554130)
|
---|
想請問一下大家...有關SUPER CACHE的使用...
我使用了之後玩遊戲反而更慢了... 不知道大家使用SUPER CACHE有什麼限制嗎? 我養驢那槽分特別多的說... |
引用:
裝遊戲那槽的 SuperCache 中,把 Read-ahead 值調高一點,應該可以改善此問題。 PS:Read-ahead 是 SuperCache 的預讀設定,設為零時表示不要預讀,優點是較不會發生做白工的情況(預讀到沒用的資料),缺點是過於被動,可能影響部份軟體的執行效能。 反過來預讀區塊設定過多,系統資源可能常常處於做白工,CPU 的使用率可能會比較高,且 Cache 命中率可能下降,不過好處是當資料的使用習慣很固定時,可以大幅提升整體的效能(因為預讀就是先偷跑),像遊戲就是如此,所以調高預讀區塊有助效能提升。 |
引用:
三年前的回文文章 現在看起來怎特別搶眼 :laugh: |
我的系統是windows vista ultimate SP1, 並且
我利用 Gavotte Ramdisk 1.0.4096.4切了記憶體4G裡, 其中的1G來當RAMDISK,並且將虛擬記憶體的位置改到其中, 但是我遇到問題,電腦經過休眠後, 會出現上次的開機記錄無法使用, 但我之前還未更新windows SP1,休眠可以正常的使用, 不會有上次的開機記錄失敗這樣的情況, 各位知道該怎麼解決嗎 ? |
真的是好用的軟體
不知道只有1G記憶體是否適用 |
引用:
生吃都不夠ㄌ還曬乾 :unbelief: |
引用:
看您的記憶體使用狀況囉,如果使用量不會超過1G的話,就切給Ramdisk用吧~~ :agree: |
引用:
快去升級 :mad: |
大家有没有用过DataCore UpTempo ?
类似SuperCache II,也是Block level cache。 What is Uptempo? - Advanced disk block cache, a sophisticated "virtual" I/O controller that sits below the file system - An I/O scheduler - A combination of very advanced mechanisms for increasing the performance of local I/O - A set of predictive self learning and workload aware algorithms - A general schema for reducing exception overhead for disk I/O - Software that sits 'below' the Windows file system and improves its performance - Simple-to-use and automated software, requiring no application knowledge from the user |
UpTempo设置界面非常简单:
![]() ![]() |
所有的時間均為GMT +8。 現在的時間是05:36 PM. |
vBulletin Version 3.0.1
powered_by_vbulletin 2025。