小弟是睡覺前開始測試的…
睡醒後也忘了還在測，想說電腦怎麼叫不醒??
就用kvm切換了一下…
電腦終於醒了，但是…也就100 warnings了
算算時間，也就是我醒來叫電腦起床的時間。
所以我猜是硬體上或軟體上變動，會出現警告的文字吧…我猜的…

請教高手們!!!prime95的問題!!!
 

小弟跑prime95遇到下列錯誤訊息.
查詢後獲得下列資訊,但弟實在不懂請各位高手們教教小弟解決方式..謝謝

SORRY~~忘了補上查詢到的資訊~~

If the message "Possible hardware failure, consult the readme file."
appears in the results.txt file, then prime95's error-checking has
detected a problem. After waiting 5 minutes, the program will continue
testing from the last save file.

Could it be a software problem? If the error is ILLEGAL SUMOUT and you are
running Windows 95/98/Me, then there is some chance that this is a software
problem. A device driver or VxD may not be saving and restoring FPU state
correctly. Windows NT/2000/XP protects prime95 from bad device drivers.
In that case ILLEGAL SUMOUT is very likely a true hardware error. The good news
is that prime95 recovers very well from ILLEGAL SUMOUT errors. Try seeing
if the problem occurs only when a specific device is active or a specific
program is running.

[Wed Nov 10 16:00:22 2004]
FATAL ERROR: Rounding was 0.4999008179, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.4999990463, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Compare your results to other computers at http://www.mersenne.org/bench.htm
That web page also contains instructions on how your results can be included.

AMD Sempron(tm) 2400+
CPU speed: 1667.80 MHz
CPU features: RDTSC, CMOV, PREFETCH, MMX, SSE
L1 cache size: 64 KB
L2 cache size: 256 KB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
L1 TLBS: 32
L2 TLBS: 256
Prime95 version 23.8, RdtscTiming=1
Best time for 384K FFT length: 34.260 ms.
Best time for 448K FFT length: 39.150 ms.
Best time for 512K FFT length: 42.248 ms.
Best time for 640K FFT length: 56.642 ms.
Best time for 768K FFT length: 67.535 ms.
Best time for 896K FFT length: 81.132 ms.
Best time for 1024K FFT length: 90.135 ms.
Best time for 1280K FFT length: 118.159 ms.
Best time for 1536K FFT length: 142.085 ms.
Best time for 1792K FFT length: 173.808 ms.
Best time for 2048K FFT length: 200.061 ms.
FATAL ERROR: Rounding was 0.4998391844, expected less than 0.4
Hardware failure detected, consult stress.txt file.
我查brench網站或README卻看不懂，我沒有超頻，跑一分鐘不到就掛了。

小弟不才....想請問一下
若是其餘2個選項這是什麼意思呢?

Options=>Torture Test=>選 SmallFFTs
Options=>Torture Test=>選 Custom (自定)

剛才看了一下教學, 測試CPU穩定度 和 測試RAM穩定度
是要分開測試..因為2個是不同選項
但若小弟想在一次長時間測試中: 同時測試出CPU和RAM的穩定度, 而不想分開測的話
那麼有沒有那個選項可以點選呢?

感謝大大解惑

我是新手,我也來推一下
有意義的文章,比一堆學校大部份教的還有用

..........我也只是菜鳥~要請PCDVD的高手現身一下了^^"

推.....
 

推...............

真是很好的資訊~
謝謝分享阿

幫樓主推一下 造福很多人喔