這塊MB的1T似乎有點問題 :jolin: :jolin:

但如果妳插滿4根512M，不能跑1T算是正常

Thank you. now the system didn't boot up.I think the bios will set back to defult.But the serious thing is.It didn't set back the defult data when the system boot up again.After I use jumper to clear cmos to restore to the defult value in the bios.The system also can't boot up.What happan with the MB? :confused: :fear: :fear:

清除Cmos後拔掉其中兩根記憶體就能開機了，而且別懶惰把記憶體擱在槽上，一旦短路你會嗅到燒雞的味道 :unbelief:

對了，小狐兄，妳的RAM除頻能跑1T嗎？

我的Infineon 512M DDR400 X2，無論怎樣除頻跑1T都不穩 :cry: :cry:

2T就算超到DDR460都沒問題

不行，現正打算把它退役，換PQI 1GB x2

順道一提，OCW放出了硬改核心電壓的方法：
http://www.ocworkbench.com/2005/asr...remodguide1.htm

那是RAM太爛，還素MB的問題呢？

好想跑1T啊 :cry: :cry:

那太強Ram所難吧，即使那是英飛凌的東西
以DDR400跑1T還是太勉強了

人傢都DDR600 同步1T了，我只要求異步跑DDR400而已啊 :cry: :cry: :cry:

But I have seen someone in the PCDVD said that--When you use 4X(2 banks of DDR400),you can set to 1T but only can't overclock too high.
Also,is there anyone in PCDVD can use 4x(2 Banks of DDR400) to set to 1T?

以我理解2 banks，即是兩條都是單面的
這個條件其實很苛刻

另外C大那邊似乎不相信AMD為了跟Windows相容把雙核喬裝成HT，看來我要找一天試試關掉Hyper-Threading的選項看看