PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)
-   系統組件 (https://www.pcdvd.com.tw/forumdisplay.php?f=19)
-   -   [心得]有2G以上RAM的可以參考 (https://www.pcdvd.com.tw/showthread.php?t=554130)

znew1219 2006-11-29 02:28 PM

引用:
作者iamyy2000
我想問,我Page size調成64KB,可是Cache size可以設定成128MB,
不一定要設定成256MB耶? :ase


多謝提醒

剛剛試了一下
MRU 可以
MFU 不行

之前亂測的時候沒注意@@

znew1219 2006-11-29 08:43 PM

剛剛調了一下又不行
看來64K 還是256MB最保險

znew1219 2006-12-01 12:47 PM

發現Cache size低於256MB, Page size 設64KB 的話
必須先stop 再start 才能調整設定

目前RAMDISK 32MB 給IE temp
supercacheII
64KB-128MB-MRU-5-infinite
加上Diskeeper7
1G RAM 跑起來還真順暢
(系統兩年沒重灌了)

vince5586 2006-12-02 11:53 AM

看完這篇討論,我今天也試了一下.
我有2G的記憶體,目前的設定是用RAMDISK切896MB,包括512MB的page file還有100MB的IE暫存,也把系統的暫存目錄設定到R:了
另外用了supercach2在C:設定32K 128MB MRU READ-AHEAD 5
目前使用上沒什麼問題,持續觀察中.感覺好像有變快一點,不過似乎不明顯,不知道是不是心理作用.
我用的RAMDISK應該是lyh728網友提供的版本,設定完重開機原本的pagefile就不見了,變成在R:了.重開機過幾次也是沒問題
supercach2我只能用一個月,反正先試試看效果如何

不知道大家對我的設定有沒有什麼建議,可以穩定又增加效能的,請多多指教!謝謝!

AlanLive 2006-12-18 03:11 AM

請問有人跟我一樣 CPU 是 E6300 並安裝上 super cache II 這套軟體的嗎?

我找到的快樂碼好像不能用在這個 CPU 上 QQ

野口隆史 2006-12-18 03:26 AM

之前的那些快樂碼應該只能用在singl core上
我之前是聽到我同事有找到dual core用的sn
早上上班時問問他好了

AlanLive 2006-12-18 04:22 AM

引用:
作者野口隆史
之前的那些快樂碼應該只能用在singl core上
我之前是聽到我同事有找到dual core用的sn
早上上班時問問他好了


dual core 的快樂碼找到了

原來就藏在 9down 下面的留言裡

用了之後有幾個問題

我的硬碟是梭魚 10 代 320G (有開 NCQ),實體記憶體為 1G

硬碟切成四個槽

C 是系統,D 是軟體,E 檔案,S 則放 Page File (設 1.6G)

super cache II 指設在 C 槽的時候 CrystalMark 跑六萬多

而指設在 S 槽的時候也是六萬多

設定的數值為 (由上到下)

128k

256M

5

15


平常我會開很多程式 (包括 bt、網路電視等),電腦不關機

偶爾也會玩 Game (吃資源的也有)

所以請問到底該設在 C 槽 (系統) 好呢?

還是設在 S 槽 (Swap) 好?

或者一半一半?

gary0718 2006-12-21 04:31 PM

最近公司發新電腦,電腦是Dell Optiplex 745,裡面的CPU是E6300 Ram 3G 顯示卡為技嘉G7300GS,該怎麼設定會比較好呢?

qweruiop 2006-12-25 12:19 AM

前一陣子寫信給官方詢問移除supercacheII的方法,得到的回覆如下,已証實確實有效(當然不是用系統還原)

Hello,

I'm sorry to hear of your problems uninstalling SCII. I am not sure
why the product won't uninstall, but here are some steps to follow that
might be helpful.

The easiest and safest thing to do is to look for a restore point in
Windows that was created just before you installed our product. If you
can revert back to that point, that would ensure that all traces of SCII
will be removed. If this is not possible, I have some manual steps for
you to try to manually eliminate SCII from your system. They are as
follows:

Before you attempt these, please create a manual restore point on your
computer!
1) Open a command prompt window,
2) Change directory to the %ProgramFiles%\SuperSpeed\scsv folder,
3) Enter the following command "sscvfisx -d",
4) Close the command prompt window.
At this point, you should try to reboot your system and make sure SC is
gone.

If that still does not work, there is one other registry key that will
need editing. Before doing this, you should restore back to the
restore point you created just before the previous set of instructions.
Then, repeat those instructions and do the following as well:

1. On the task bar click "Start\Run...", and enter "regedit" in the
text box.
2. In the left page of RegEdit, open the key
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall".
3. Right click on the sub-key "{5B14E06B-97A1-11D3-B2C8-00C0F014C0F2}",
and click "Delete". Make sure you have selected the correct sub-key. If
so, confirm the deletion.
4. Close RegEdit.

I know these instructions are a bit long, but they should allow you to
eliminate SCII from your system.

Regards,
Marcie Tardiff

dinness 2006-12-26 10:02 AM

引用:
作者AJ0804
+1 …但還是給他手動重開機,
然後再去磁碟設定…還是可以用 :think:
但是反安裝後 在新增/移除 裡面還是會有程式的名字存在..
重新安裝 ,會出現登錄檔未移除 的訊息 :jolin: 用兔子或uninstaller之類的
也沒辦法清乾淨…後來只好用ghost 大法…


+1
小弟一開始在移除時發現無法移除,後來把環境變數的位置跟虛擬記憶體的位置都改回C槽,就可以移除了,各位無法移除的大大可試看看


所有的時間均為GMT +8。 現在的時間是10:56 PM.

vBulletin Version 3.0.1
powered_by_vbulletin 2025。