![]() |
PCDVD數位科技討論區
(https://www.pcdvd.com.tw/index.php)
- 七嘴八舌異言堂
(https://www.pcdvd.com.tw/forumdisplay.php?f=12)
- - 小米9 刷 pixel experience
(https://www.pcdvd.com.tw/showthread.php?t=1180466)
|
---|
引用:
system, data, 兩個cache, internal storage都清一清 清完再刷PE PE刷完直接重開機試試 |
2個附加檔案
引用:
要使用格式化date分區喔,如下圖所示 |
應該是 twrp 的問題.
現改用 OrangeFox. |
引用:
可是我也是用twrp啊,是不是版本的問題@@? |
OrangeFox是建立在TWRP上 :flash:
recovery忘了問版本 |
引用:
可能. 我怕得是這個: Xiaomi ARB Xiaomi has broken ARB implemention which can brick your phone forever! If your Xiaomi device has ARB, and you are on a MIUI ROM, then you had better tread very carefully if you want to change your MIUI ROM to a different MIUI ROM, or to a different version of the same MIUI ROM. Search on Google for "ARB", read and understand everything, and then decide whether you really need to proceed. |
看了整串討論, 所以我現在都不大想刷機...
|
引用:
要找專用的twrp不是隨便的都可以刷. |
https://forum.xda-developers.com/t/...993151/page-145
eliransin said: Sanzium - hope you or anyone else who is reading this can help me, I am quite a newbie in this. I did it several times with different roms/devices but all went smoothly until now. I tried to flash the rom with the newes FW (MIUI 12.0.3 global and with a downgraded FW to the one in the original post) in both cases my phone went into a bootloop. I did exactly the following (after unlocking the bootloader and enabling dev mode): 1. Flash TWRP through fastboot. 2. wipe -> factory reset + wipe data. 3. advanced -> sideload 4. sideload 11.0.9 FW + wipe-> factory reset + wipe data (tick wipe dalvik and cache) 5. sideload PixelExperience (with wipe dalvik and cahe ticked) I performed it once with step 4 and once with a clean fresh stock rom of MIUI 12.0.3 without step 4. In both tries the device went into a bootloop - what did I do wrong? I am whiling to take a shot in building PE for MIUI12.0.3 (latest FW) but I will probably need some pointers as I have never cosumized an android rom before nor I know if the build would matter without FW reverse engineering. Thanks, Click to expand...You probably need to format /data, specially if you are coming from MIUI. What I always do when flashing Cepheus is: 1. Transfer files to internal storage 2. In TWRP: wipe > advanced > tick system, data, cache and dalvik 3. Flash firmware 4. Flash ROM 5. Flash Gapps 6. Format data and reboot I usually only flash Magisk after first boot ------------------------------------------------------- 所以說 從最新的MIUI 12.0.3 global Mi 9 必須刷回 PE 當時的 firmware. 或著等更新的 PE 出來. |
哪裡可下載 PixelExperience_cepheus-10.0-20201206-0801-UNOFFICIAL.zip ?
from: https://forum.xda-developers.com/t/...993151/page-145 |
所有的時間均為GMT +8。 現在的時間是05:48 PM. |
vBulletin Version 3.0.1
powered_by_vbulletin 2025。