3276下面有一個
Alternate Driver - 5.13.01.6025
那就是啦

kt133a也會?...我想釐清一下問題....
tm你是不是也是買原廠Build by ATI, Made in China的卡..
還是憾訊OEM卡?

我只裝顯示卡, 重灌Windows 2000後都會..這表示部是主機板的
問題, 就是卡的問題了...難道是DDR ram的問題嗎@.@?

如果你的狀況跟我一樣, 那灌了新的driver應該還是一樣.

tm...你有結果後可以e-mail通知我一下嗎?

如果是這批卡做的不好的話, 我較要去換了..只是目前光華商場關店中..

我找到一個類似的案例, 是貼在ATI上的, 我的狀況跟這個很像:
RADEON 8500 128MB/RADEON 8500LE 128MB - Windows boots to VGA mode on systems using AMD 750 chipset
This issue affects the RADEON 8500 128MB and RADEON 8500LE 128MB products when used on some AMD 750 chipset based motherboards.

After installing the graphics card, Windows will only boot to VGA mode (640x480 16 colors). Device Manager will show an exclamation beside the entry for the graphics card in the "Display Adapters" section.

If an attempt is made to install the ATI display drivers for the product the install program may hang during the install process.

If the display drivers do install, the system will continue to boot into VGA mode and an exclamation will appear beside the ATI display driver entry in Device Manager.

This symptom is related to an issue with the System BIOS used by the motherboard itself.

若是重裝的話...
建議是這樣裝...
os -> via 4in1-> 8500le driver
之後再去裝你要的...
新的 via 4in1 可以解決很多問題...

Re: 我的也一樣耶!!

quote:
--------------------------------------------------------------------------------
我的也一樣Ati Readoon 8500這一款顯示卡，但一裝好CD上DRIVER
,用不到15min就會當機ati2dvag.dll error
,WIN XP灌了3次,還是不行,用舊的驅動跟新的驅動都會當機或REBOOT
主機板是VIA 的KT266
我試過Windows XP上driver都無法啟動也是這樣 .

我已經跟廠商退錢回來了
感覺只會賣,售後服務很濫!!
我買NT$7800 (會不會太貴!! build by ATI)~
退NT$7500回來~~
看來再等ati8500 128MB 出來後再試囉!!

我ㄉ沒問題,可以用,但......
 

他ㄉTV-out感覺.....,我用s端接至av擴大機s端,再由
擴大機av端接至增你智三槍頭影機(因沒s端),其效果
真$#@@$^雪特,不知是我不會設定還是.............
有那位是用和我一樣ㄉ投影機或其他ㄉ頭影機,效果
如何,不會因8500,又要敗一臺液晶投影機吧~~~~