PCDVD數位科技討論區 - 剛送修回來的WD硬碟還是怪

引用:

作者冷刃冰心

報告~我的也是一樣!!
板子是P4P800-VM,其中一顆HD也是WD SATAII 2500KS
950330買的,裝了後用HD Tune 2.52 測也是給它出現62~70度不等
用測溫線量頭量屁股也是在34度左右..........不懂
同樣一台的系統Seagate 120G其實還比它燙一些咧.........
Power是七盟350BKV.....想不透.........不過還是照跑~不管了
過陣子�**曍ower再試一下好了........

我的情形也是一樣, 後來在網路上搜尋, 在捷元的討論區找到以下的資訊, 看來似乎是 WD 250GB (WD2500KS) 硬碟的 Firmware 有 bug.

Here's the WDs support team response:
quote:

The temperatures reported by all SMART monitoring software is incorrect for the drives due to a firmware bug. The drive is not defective but the temperatures that the revision of the drive you have bought report to software are incorrect. We are working on a solution. If possible, try once to open the tower and put your hand on the drive when it is reporting a high temperature to make sure the drive is not hot.

Don't worry about the high temp, seems like a firmware bug which will be fixed soon, see my relative post. Besides, check it by yourself, touch the disks with your hand, are they really hot?

About the low performance of transfer rate, do a test, exchange the 2 sata cables eachother, run the hddtune benchmark test again and see if the issue is now located to the 1st disk?

原文出處: http://genforum.genuine.com.tw/?p=t...Page=1&Location

我已去信原廠支援網站詢問此問題, 相信八成是 Firmware bug.