我之前打電話問過康博
他是回答說T300在mce裡只能看數位不能看類比

沒錯,據小弟所知似乎沒有任何軟壓卡可支援MCE
不知bochin1010大是想用MCE看數位的嗎??

之前已有很多網友說過用電話聯絡客服較快,畢竟網路有時還是會有些不知名的問題

"Microsoft Media Center 不支援" 臺灣 " DVB-T" 這句話基本上是錯的

應該修正為, DVB-T TV 卡的廠商所推出的 BDA 驅動程式的 MCE_FreqTranslate 要能夠支援台灣 DVB-T 所使用的頻譜波段

這是某一家電視卡製造商的 BDA 驅動程式的 Release Notes

至於這是哪一家做的, 看名子就知道了... :laugh:

具備專業能力的製造商, 不僅有自有硬體的研發能力, 研發團隊對於軟體的廣泛支援度跟穩定度以及開發能力更是重要

=======================================================
Twinhan BDA driver for DVB-S/-T/-C/ATSC


For differnet applications, please install with the corresponding INF files.
1. For MCE2005 & DVB-T in Australia, please install with "THBDA_MCE_AU.inf" in folder \THBDA_MCE_AU.
2. For MCE2005 & DVB-T in UK(VHF/UHF:8MHz, like UK), please install with "UDTT2BDA_MCE_UK.inf".
3. For MCE2005 & DVB-T in Europe(VHF:7/UHF:8MHz, like Germany), please install with "UDTT2BDA_MCE_EU.inf".
4. For MCE2005 & DVB-T in Taiwan, please install with "THBDA_MCE_TW.inf" in folder \THBDA_MCE_TW.
5. For non-MCE but BDA based application (like ShowShift) or DVB-S/DVB-C/ATSC, please install with "THBDA.inf".

To install DVB-S/ATSC, please refer to THBDADriverNote.txt for proper settings in inf file.

A BDA utility (THBDAConsole.exe) is included. With this utility, users may change the BDA default settings after
driver installed.

Usage for THBDAConsole.exe:
If THBDAConsole.exe is launched with the parameter -S, it's started in minimized mode on the task bar.

For Windows MediaCenter (MCE2005) DVB-T users,
If the option "Auto setting by country (for MCE)" is enabled, the driver settings will be changed for
MCE2005 accroding to the location of Windows XP installation.
The location setting can be changed in "Control Panel" -> "Regional & Language options" -> "Location".
To enable this option, users should make sure if the location is set correctly.
By default, the option "Auto setting by country (for MCE)" is enabled.

The option "ShiftFreqScan" determines if off center frequency scan(+-167KHz) will be done or not in MCE2005.
For each DVB-T channel MUX, MCE will scan triple times, the central frequency F, F-167Khz, then F+167Khz.
Our tuner's frequncy range tolerance is larger than +-167KHz, so there will be triple programs found.
Disabling this option can improve channel scan speed and eliminate the duplicated programs found.

For non-MCE BDA applications, like Showshifter, PowerCinema 4, WinDVR6...,
The option "Auto setting by country (for MCE)" "MUST" be un-checked.
Two other options "MCE_FreqTranslate" & "FixedBandwidth" "MUST" be set to "None".

==========================================================================================
Revision History,
----------------------------------------------
v 1.2.1.9
New features,
1. Change the BDA source filter names for various Twinhan cards,
Tuner filter:
Previous - "TwinHan PCI BDA Tuner Filter"
Now - "TwinHan DVBS BDA Tuner Filter",
"TwinHan DVBT BDA Tuner Filter",
"TwinHan DVBC BDA Tuner Filter",
"TwinHan ATSC BDA Tuner Filter"

Capture filter:
Previous - "TwinHan PCI BDA Capture Filter"
Now - "TwinHan DVBS BDA Capture Filter",
"TwinHan DVBT BDA Capture Filter",
"TwinHan DVBC BDA Capture Filter",
"TwinHan ATSC BDA Capture Filter"

----------------------------------------------

v 1.2.1.8
New features,
1. Update THBDAConsole.exe for BDA driver enumeration.
2. Different filter names for various Twinhan's card.
----------------------------------------------

v 1.2.1.7
New features,
1. Fix multi-card issue in MCE.
----------------------------------------------

v 1.2.1.6
New features,
1. Fix CI interface bugs
2. Add a complete CI sample program
----------------------------------------------

v 1.2.1.5
New features,
1. "MCE_FreqTranslate" & "FixedBandwidth" are independant
2. "MCE_FreqTranslate"=0 & "FixedBandwidth"=0.
In MCE, if bandwidth= -1, auto translate it to 7 for VHF & 8 for UHF.

3.THBDA console
3.1 The country is set by the location, not "format"
3.2 Auto setting for MCE,
3.2.1 "MCE_FreqTranslate" & "FixedBandwidth" should be updated immediately when checked.
3.2.2 ShiftFreqScan should not be grayed (or set by auto).
3.3 Auto pop-up when lauch first time (if with a parameter -s or -S, then no auto pop-up)
----------------------------------------------
v 1.2.1.4
New features,
1. Registry definitions are changed (DVB-T)
2. IOCTL interface for CI support. Sample code is attached.
3. A new THBDAConsole.exe for configure TwihnaBDA driver.
----------------------------------------------
v 1.2.1.2
Bugs fixed,
1. Fix scan failure in P4 CPU 915 chipsets
New features,
1. Registry definitions are changed
2. WHQL certified.
----------------------------------------------
v 1.2.1.1
New features,
1. Support DVB-S/DVB-C and ATSC
----------------------------------------------
==========================================================================================
Known issues with MCE2005
1. MCE2005 DVB does not support AC3 audio. (only ATSC AC3 is supported)
2. The HDTV display supoorts up to 1280x768 only, (many HD programs are up
to 1920x1080i or 1440x1080i)
3. MCE2005 does not include any MPEG2 decoder, so you should install a MPEG2
decoder first, either IVI, Cyberlink, Elecard, or NvDVD.
4. Not all VGA cards can support MCE2005 well, the only VGA card we test ok
is Nvidea GeForce4 MX440 & MX4000.
5. Please be sure to install Audio driver well before running MCE.
==========================================================================================

Q: Microsoft Media Center 2005 不支援"臺灣" DVB-T.
A: Region 選"Taiwan" -> "Unsupported Region" Error Message on Microsoft Media Center 2005 . This bug is fixed on Microsoft Media Center 2005 Emerald.

I had use the TwinHan's Taiwan MCE2005 driver before.
Select "Taiwan" region -> "Unsupported Region" error
Select "UK" region -> OK (14 programs)

There are many limitations in the Media Center for DVB-T.
Please refer to this link:
http://www.hauppauge.co.uk/board/showthread.php?t=4597
No DVB-T Radio stations are picked up
MCE2005 doesn't support DVB-T Radio under MyTV
(臺灣去年公視有試播2個Radio programs, 目前沒有任何Radio programs 播送)

What's Emerald?
Emerald is the internal codename for MCE2005 Update Rollup 2 which will be a free update to MCE2005 and will bring several enhancements.
- 支援更多的國家地區(No more "Unsupported Region")
- 支援 DVB-T Radio program
- ...

Source : http://msmvps.com/chrisl/archive/2005/06/19/54096.aspx
Windows XP Media Center Edition 2005 Update Due In August?
| According to Neowin….
Microsoft have been steadily testing an update for Windows XP Media Center Edition 2005.
The update which will RTM in August is expected to include support for the upcoming Xbox 360 and the following:
Native digital cable
Content Protection
Improve burning (DRM, network, Hi-def, DVD-RAM)
MCX on WinCE clients (Babylon, TV2 as stretch goal)
Playback reliability
Running 3rd party apps out of proc
Address top usability issues
Platform Security
Additional languages and locales
The update is currently being beta tested and is at Beta 2 stage. A release candidate 0 is expected to be released late July with an RTM following on August 12th for English, French, German, Korean and Japanese versions. Dutch, Italian and Simplified Chinese versions are expected to follow 2 weeks later.

ATSC AC3 Audio is supported in Rollup 1 Update.
But the DVB AC-3 Audio (Australia) is still not supported in Emerald ?
Do you want to try the RC0 ?

http://www.pcdvd.com.tw/showthread....0&goto=lastpost

我是用類比沒錯...放棄類比
剛剛測試了一下數位
掃瞄完100％ 可是搜尋不到任何頻道
但是自家軟體或他家軟體 都可以搜尋到頻道
我使用的是簡體版 已更新至.2300版本
請問有沒有T300同好
一起研究一下 怎麼我連數位也看不了...

Please refer to this link "MCE2005 media center not support scanning Taiwan's DVB-T signal" :
http://www.msusenet.com/archive/ind.../t-3022529.html

PSISDECD.DLL內含Media Center使用的頻率表：
澳洲(Australia)的頻率表已被澳洲人證實有缺少幾個頻道:
http://forums.dvbowners.com/
http://www.dtvforum.info/index.php?showforum=9
但是臺灣(Taiwan)的頻率表？尚待有心人找出真相.

建議使用支援Taiwan的Microsoft Media Center 2005 Emerald版本.

(Emerald支援Analog TV 軟壓卡, 需要加裝SW MPEG2 Encoder; TV Video is OK, TV Audio need to be clarified.
Is PCI audio is needed or not ?)

如何知道Microsoft Media Center 2005 版本?
To determine the version of Windows XP Media Center Edition that you are running, follow these steps:
1. Start Media Center.
2. On the Settings menu, click General.
3. Scroll down, and then click About Media Center.
The version number of the application that you are running is displayed.
http://support.microsoft.com/defaul...kb;en-us;837707

我完全放棄在MCE 2005 上用T300看電視了
地區選擇德國 一樣搜尋不到頻道
今天又重灌回XP PRO..
我看還是等待繁體版的MCE 2005了
如果到時數位頻道還是不能看
那..就是compro驅動的問題了

為何要重灌回XP PRO ?
除微軟的Media Center 之外的PVR軟體(Compro PVR, InterVideo WinDVR, Compro DTV, WinFast DTV)都可使用.
裝"Asia Language Pack" 就可輸入中文,
請參考"Installing East Asian Language Support Under Windows XP":
http://newton.uor.edu/Departments&P...llation_XP.html


Trick: "net stop ehrecvr"