PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)
-   儲存媒體討論區 (https://www.pcdvd.com.tw/forumdisplay.php?f=20)
-   -   alcohol error 25001 (https://www.pcdvd.com.tw/showthread.php?t=479721)

honlin 2005-05-04 07:18 PM

Thats 1 solution, but it's not needed if u use this uninstallation procedure.....


Uninstalling Alcohol 120% (v1.9.2/v1.9.5)


1. Unmount all mounted Images and then set the Virtual Drives to "0" in A120% Virtual Drives Settings.

2. Reboot

3. Uninstall A120%

4. Reboot

5. If still the Virtual Drives is listed in Explorer you have to do the following


#1 - Remove "The Alcohol" SCSI Controller from "SCSI and RAID controllers" under the Device Manager

#2 - Remove the Plug and Play Bios Extension from System Devices

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Services\a347bus
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Services\a347scsi

#3 - Remove the Virtual Drive Drivers from the Windows/System32/Drivers Folder
a347bus.sys
a347scsi.sys


6. Reboot


NOTE :
It's recommended that you go thru "5" even if the Virtual Drives has been removed, this is just to make sure that you dont get any Installation Errors when you install the new/updated version of A120%


If you used Expert Mode during the installation of A120% just have 2 remember what you named the drivers and look for that instead

AMD-Ti 2005-05-05 07:08 AM

Sodesga, danke.

plutka 2005-05-05 11:23 AM

呼 終於搞定 , 原來重點除了 25001 的錯誤訊息,還有後面數字也要對照,
我的訊息是25001 ,25009 。解決方式用google大神找到

Internal Error 25001, 25009
Start => faire regedit
* Aller à HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM\0003 (ou 0002 / 0004, là où il y les drivers d´alcohol)
* ouvrir avec le click droite les "permissions" et regarder si il y a quelque part un cochet. Si oui, l´enlever.
(以上不知是那國語言)

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM\0003
我把0003 這個機碼整個刪掉就可以裝了 ,呼呼呼~~累

ruinousdeity 2005-07-05 10:32 AM

我試過樓上的辦法,不過卻碰上一個尷尬的問題...."刪除機碼時發生錯誤" :jolin: :jolin:

這...我真的無言阿...怎會這樣...有什麼辦法嗎? :cry:

panto 2005-07-06 01:59 PM

系統還原到安裝前.....ok

ceowea 2005-07-06 06:23 PM

引用:
作者ruinousdeity
我試過樓上的辦法,不過卻碰上一個尷尬的問題...."刪除機碼時發生錯誤" :jolin: :jolin:

這...我真的無言阿...怎會這樣...有什麼辦法嗎? :cry:


妳先更改對於0003機碼的權限,改成完全控制!就可以刪除了!


所有的時間均為GMT +8。 現在的時間是04:50 PM.

vBulletin Version 3.0.1
powered_by_vbulletin 2025。