不要掉太多格就不會影音不同步~

我錄.avi 平均一小時掉三格

當音效以 mp3 128k 44Mhz可影音同步二小時(只試到2小時)

但以mp3 192k 44Mhz超過80分鐘

會有不同步現象

註:我有開啟 master stream 為audio

不會不同步呀~:)

好軟體靠大家支持~
好用的話花點錢註冊是值得的~
還沒看過那麼用心的作者喔~!
每一個版本都有長足的進步....
現在預錄功能也完全正常喔~

你好，小弟想請問一些關於fly 2000 TV設定的問題~

請問你有開啟 master stream 為audio嗎?

抓取聲音的格式設式為何?

錄影的的時間有多長?(我是指不分段)


因為之前的版本我用起來會有影音不同步的現象~
現在的版本已改善很多~
但感覺取樣大，還有時間長時(90分鐘以上)，仍然會有影音不同步的現象~
我的設定是MP3 192kbit 44kHz~
想知道怎樣的設定可以都影音同步，就可不用分段再以VD來合~

好用的fly2000tv

好用的fly2000tv

我有開winxp buffer & master stream -> audio
deinterlace method at capture -> blended clipping(best)
denoise method at capture -> gradual denoise(best)
video -->divx5.05 流量1280kbps
audio -->mp3 128kbit 44kHz
試過錄超過50分鐘 大概只掉15~25格
但撥放時並不會不同步~ =))

看了大家的討論，小弟也頗想用用看這個軟體，但是小弟有以下的一個疑問

在別的網站上有看到說，如果電視卡的晶片是philips 713x，就可以直接用遙控器遙控這個軟體，是真的嗎？
小弟的電視卡是compro videomate，不知道有哪位大大是用這張卡搭配fly 2000 tv 的，遙控器可以使用嗎？
或者是有什麼方法可以讓遙控器來遙控這個軟體呢？

我不同步的問題還是在，長時間很難同步~

我目前是設定

winxp buffer & master stream -> audio
MP3 256kbit 44kHz
DIVX 5.02 98%

因為平常都在錄MTV台
只要超過二小時，就會開始不同步~
不同步和設定似乎無關
只好用FLY 2000 TV 的分段功能，大概90分鐘一段
再以VD來合
但是常會因流量的不同而無法合併(有時可，有時不可)
有沒有人和我有一樣的困擾??有沒有解決的方法?

正好有用到.
謝謝!

等等新的驅動還有下一版改進吧.... 原作者在Q&A裡有提到
FLY 2000 TV - Advices of video capture

Unfortunately, WDM drivers for Philips saa713x chips and built on LifeView LR138 reference-design, yet are not lead up to perfection. In them till now there are some problems interfering to the users of cards to use of possibility of the chip completely. I shall list main problems:

At capture of a video, always try to use the format YUY2 for minimum load at the system and getting best quality image, as the format YUY2 does not sustain a redundant information. But in formats which are differ from RGB - for example in YUY2, UYVY, YV12, that is to say in YUV- component, the driver saa713x informs about negative value of vertical size, for example 720x-576. If biHeight is positive, the bitmap is a bottom-up DIB and its origin is the lower-left corner. If biHeight is negative, the bitmap is a top-down DIB and its origin is the upper-left corner. Many DirectShow filters and codecs, and also, filter Microsoft AVI Mux do not understand (-) biHeight. At build DirectShow graph manager with such filters and attempt capture in anyone YUV- the component format - several filters cause adding in the graph the AVI Decompressor filter, distorting capture formats, several filters causes crash Windows. LifeView Driver 20.50 and higher, solved this problem.
When switching channel or videoinput, WDM driver confuse Comb filter parameters, that sometimes give grid over image in SECAM format, or blur (the shift) color in PAL format.
WDM driver supports a maximum size of a frame only 720x576. Mode 768x576 made via interpolation from 720x576. So better capture in 704x576 or 720x576.
WDM driver of tuner control not support TV frequency below 55 MHz and above 800 MHz. It is necessary to do switch channels through low-level COM interface.
WDM driver not support FM Radio mode. It is necessary to do work with FM radio through low-level interface.

About codecs...
As far as possible, do not make capture in AVI, with compression of audio on real-time.
It threatens with desynchronize of video and audio streams, or at some audiocodecs can cause sudden break of record. Use the hardware audio format - PCM.