PCDVD數位科技討論區

PCDVD數位科技討論區 (https://www.pcdvd.com.tw/index.php)
-   顯示卡討論區 (https://www.pcdvd.com.tw/forumdisplay.php?f=8)
-   -   AMD的APU,到底能不能設定超過2G的RAM (https://www.pcdvd.com.tw/showthread.php?t=1164475)

ULTRA99 2019-08-12 05:00 PM

引用:
作者npustsocool
最近入手2200G,搞了好久才發現。
『開機選單』要關閉CSM,UMA Frame buffer Size指定2GB以上內顯才能正常。


我的是技嘉 A320M-S2H 主機板 !

CSM 是開啟的 , 內顯記憶體可以設定 2G 沒問題 ~ :)

npustsocool 2019-08-12 06:21 PM

引用:
作者ULTRA99
我的是技嘉 A320M-S2H 主機板 !

CSM 是開啟的 , 內顯記憶體可以設定 2G 沒問題 ~ :)

抱歉!應該是3G以上才對。
板子是華擎Fatal1ty AB350 Gaming K4。
2G的不用關閉CSM,關閉之後才會出現3G以上的選項!要在北橋設定那邊的UMA Frame buffer Size才有用。

a9607 2020-03-29 12:33 AM

引用:
作者commando001
我覺得反正不管有沒有劃給APU獨佔本質上都是主記憶體
所以除非遊戲有偵測要求獨佔記憶體
獨佔記憶體劃個512MB左右
剩下讓Windows自由發揮就好


其實還可以設定得更小些…
:)

techspot上有篇測試,劃給64MB跟2GB的效能幾乎一樣…



這裡有翻譯好的…



某主機板討論區的文章

引用:
http://forum.asrock.com/forum_posts...e-available-ram

If using windows 8/8.1/10/Linux there is no need to increase the Frame Buffer past 64MB because the graphics card will pull from system RAM anyway, its best to set it to 64MB, AMD/Board manufacturers set it to 1GB or 2GB default just for compatibility reasons with some older OS's.

如果使用Windows 8 / 8.1 / 10 / Linux,則無需將幀緩衝區增加到64MB以上,因為圖形卡仍將從系統RAM中分配記憶體,最好將其設置為64MB,AMD /版卡製造商將其設置為1GB或2GB。默認是出於與某些舊OS兼容的原因。

By setting it to 64MB you have all the memory free when not used and used when needed, if you set a larger frame buffer you just reserve memory that cannot be used by the CPU for other tasks.

通過將其設置為64MB,您可以在不使用時釋放所有可用的內存,並在需要時使用它們,如果設置較大的幀緩衝區,這些保留的記憶體則無法讓CPU利用於其他任務。



:rolleyes:

BlueBellKing 2021-05-21 12:26 PM

路過分享一下:技嘉 A520M S2H 關掉 CSM 後可以選到 16GB,開 CSM 最大 2GB :)


所有的時間均為GMT +8。 現在的時間是01:07 PM.

vBulletin Version 3.0.1
powered_by_vbulletin 2025。