無聊~~你買顯示卡就只為了看DVD嗎??從電腦螢幕看DVD會爽到那去??
不如用電視看，說句公道話ATI的Driver真的是不怎麼樣，除非你真的很強又不怕
麻煩可以搞定，不然還是用n牌較方便

真的是個人爽就好
不喜歡用就不要用嘛...
上來開砲起紛爭都不是你我樂見的

Mani再罵一次髒話就停權

窮人就是敗不起dvd設備呀~~~
我也是用gf2看dvd呀....我想不管那張卡放dvd畫質已經很好了..
只是有人要完美無暇而已....

沒事亂跑進來,先停權一個禮拜

對不起,離題了
我覺的還是matrox g550好用好裝,裝機完,光碟驅動灌入到完成,一次ok,頂多上網找找新版驅動而已
無關主題, 別打我

可以跟我說一下換裝驅動程式的正確步驟嗎?
我是用 radeone le板
買回來裝時,一次就ok
後來第一次更新驅動程式....畫面黑掉了(不是當機,是沒有訊號到lcd)
後來弄了好久終於ok了(到現在還不知怎麼ok的,因為灌了好多板本的驅動程式,我都花了:eek: )
後來有看到人說,要更新驅動程式前,要先把之前的驅動程式移除
所以上星期拿到新的更新程式時,我就先把驅動程式移除,再裝新的驅動程式
,因為我拿到的是一個壓縮執行檔,執行這個程式就會安裝驅動程式...
可是還是一樣黑掉耶 >_<
我後來是先用解壓縮程式將這個壓縮執行檔給解開,再從裝置管理員那裡選顯示卡的內容中的更新驅動程式,再從解開的檔案中挑選驅動程式,才ok ^^"

雖然是裝好了,可是總覺得步驟怪怪的耶...:confused:
謝謝囉 :D

1. Go into the Control Panel and under the ADD/REMOVE SOFTWARE icon uninstall the ATI MultiMedia software and/or the ATI DVD software.

2. Uninstall the ATI drivers also found in the Add/Remove section. Once removed, it will prompt you to reboot....do so.

3. When returning to windows, the NEW HARDWARE FOUND wizard will come up and will tell you that it has found a new VGA card and will prompt you for drivers. Hit CANCEL!

4. Now, go to START - SEARCH - FOR FILES OR FOLDERS and do a search for all files and folders using the filename ati*.*
This search will normally give you 3 to 4 files found in your c:/windows directory and subdirectories (including the Windows/System directory). Select these files and erase them. Now go to your Recycle Bin and Empty your bin.

5. Next...time to go to your Registry. Go to START -- RUN -- regedit

Here go to key HKEY_LOCAL_MACHINE -- SYSTEM -- ControlSet001 -- Control -- Video . Here there should be 4 entries. 3 of them are default Windows XP entries and the 4th one is put in by the ATI drivers. Expand each one by one until you see ATI entries. Once found, erase the entire key.

Now repeat the same step above for the ControlSet002 key and the CurrentControlSet Key. Normally, whenever you erase a key in the ControlSet001, XP automatically deletes it in the CurrentControlSet section too. So if the ATI key is not found in the CurrentControlSet section, don't worry about it.
Once all keys are deleted, proceed to the next step.

6. While still in the registry, go to the key HKEY_LOCAL_MACHINE -- SOFTWARE section. Here you should find an ATI Technologies key. Select it and delete it. In that same section, look for an Installed Options key. Expand it and there you should find another ATI Technologies key. Select it and erase it.

7. Still in the registry, go to HKEY_CURRENT_USER -- Software and there you should find another ATI technologies key. Select it and erase it. Once all this is done, close the registry. the registry is now clean.

8. Close all windows and reboot.

9. When in windows after the reboot the NEW HARDWARE FOUND WIZARD will pop up again. Cancel that. Now find the new ATI drivers that you have downloaded and extracted and run the SETUP file. Once complete, reboot and you are done. You may want to reinstall your ATI MMC software and DVD software if you use them. DONE!

花錢的是大爺
我的R8500正常服役中
一個字,讚!
........
我也曾經被N牌的 Driver搞到死
當初花了四千六大洋買了第一張自己的T&L 3D加速卡(GF2MX.....)

只要灌公版Driver ,3d Mark 2000分數立刻打五折...只能灌ASUS的驅動
你說怪不怪?(不過ASUS的Driver也是從公版修改的押..怪怪)
當初還不是覺得很幹
其實我到目前也一直是N牌愛好者,幫朋友組電腦也都是裝N牌的卡.
現在我自己換了r8500以後
一點問題都沒有
也讓我的PF90從1024*768升到1280*960了
.總之
有問題用問的
不要解決不了就上來口水戰

不過說話總要客氣點吧
賺錢高手的標題和語氣都太激烈了點
P.S.我也是天堂來的人
但是我不是小白