starless兄,你是說治平大哥提供的Philips韌體嗎?
如果是,小弟試過了...也試過你說的Nero版本(現在是用6.3.0.0)

剛剛又拿Ha! CD Burner來燒-R(4x),拿到播放機讀都OK!

對了,順便說一下,我之前用Nero 6.3.0.2來模擬燒錄時
燒到100%時像當機一樣(Nero都沒反應),但機器還是一直閃爍紅燈,後來重開機
都會出現一段訊息(可惜我沒把訊息視窗抓下來),意思是我片子可能有燒過,無法模擬
但片子是新的(試了三片,都出現一樣的訊息),從開機也一樣!
所以後來就換Nero 6.3.0.0~

上述情況(模擬)在Philips韌體和B3D7上測試都一樣
應該是Nero在作怪...

還是建議800A用Ha! CD Burner或RecordNow來燒DVD...

嗯！目前主力是Ha CD Burner跟Alcohol以及Nero 5.5.10.56，目前還打算死守5.x版，偶不敢拿金錢跟自己開玩笑………:D

6.x版前科不少，我自己也都有碰過，還是等穩當一點再說∼:agree:

嗯!我了解了..謝謝你 :)

http://forum.pcdvd.com.tw/showthrea...10&pagenumber=1

上面的adamchien兄把韌體刷成Philips 4x
用Nero開始燒錄,也出現錯誤訊息!
在Check disc後認為那不是DVD+/- RW or DVD+/-R ???
結果用酒精燒就ok!

http://forum.pcdvd.com.tw/showthrea...10&pagenumber=2

上面是網友對Nero支援-R的解說.

謝謝您的指出與說明指引囉∼:)

Benq 4X B3D7韌體 我買來就是這個嘞...
不過燒附的+rw都只能到2.4x
該怎麼辦呢?~

你得把狀況更specific地說明，否則無從幫忙起。:)

需要那一些東西阿

我是差在ide上的
用的片子是 Benq 800A DVD+RW送的那一片+rw

########################### System Information ###########################
Windows 2000 Professional 5.0 Service Pack 4 (Build 2195)
Processor info: Intel(R) Pentium(R) 4 CPU 2.00GHz (1999MHz)
Memory Available to Windows: 392,688 KB



///////////////////////////////////////////////////////////////////////
(F:) ATAPI DVD DUAL 8X4X12(1:1) detail information.
///////////////////////////////////////////////////////////////////////
Vendor Identification: ATAPI
Product Identification: DVD DUAL 8X4X12
Production Revision Level: B3D7
Location: atapi, Port 1, Bus 0, Target 1, Lun 0
Support recording method: RAW DAO(16), TAO
BURN-Free Technology: Not Supported
Auto-Select best write speed: Not Supported
-* Note: This information below is provided by the unit, it might be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response Data Format: 02h
CD-R Read/Write: Yes/Yes
CD-RW Read/Write: Yes/Yes
Read CD-R Fixed Packet: Yes
Test Write: Yes
DVD-ROM Read: Yes
DVD-R Read/Write: Yes/Yes
DVD-RAM Read/Write: No/No
Audio Play: Yes
Composite Audio and Video Data Stream: No
Digital output (IEC958) on port 1 Supported: Yes
Digital output (IEC958) on port 2 Supported: No
Mode 1 Form 2: Yes
Mode 2 Form 2: Yes
Multi-Session: Yes
BUF: Yes
CD-DA Commands supported: Yes
CD-DA Stream is Accurate: Yes
R-W Supported: Yes
R-W De-interleaved and Corrected: No
C2 Pointers Support: No
ISRC Supported: Yes
UPC Supported: Yes
Read Bar Code: No
Lock media into the drive: Yes
Currently drive Lock state: Unlocked
Prevent Jumper: No
Eject Command: Yes
Separate volume levels: No
Separate channel mute: No
Changer Supports Disc Present: No
Software slot selection: No
Side change capable: No
P through W in Lead-In: Yes
Maximum Read Speed Supported (with current disc): 40X (6000 KB/Sec)
Maximum Write Speed Supported (with current Disc): 24X (3600 KB/Sec)
Current Read Speed Supported (with current Disc): 40X (6000 KB/Sec)
Current Write Speed Supported (with current Disc): 24X (3600 KB/Sec)

#######################################################################

我一買來就試燒+RW 不過只有2.4x ....
不知該怎麼半

有先做成Image嗎？燒錄軟體用的是？

我是用nero6.3
燒了2次~
一次是把電腦內的檔案燒到dvd (資料)
一次是用neroㄉ測試跑ㄉ